Controller Board Development
Lighting controllers, meter interfaces and machine monitors share one job: they measure, switch and report from inside someone else's equipment. We develop each controller board and its firmware together.
- Network & Connectivity
- Security & Surveillance
- Connected Healthcare
- Smart Cities & Infrastructure
- Fleet & Logistics
- Energy & Smart Utilities
Designed for the Pole, Cabinet or Machine
A controller board lives inside equipment it does not own: a street-light pole, a meter cabinet, a machine. It has to fit the available space, run on the available power and survive the local environment. We design the input and output circuits, the processor and the communication link for that setting, then write the firmware that runs on it. Street-light control and smart metering are two areas where we have built systems of this kind.
Hardware Capabilities
A requirement becomes a validated prototype, with the firmware and the cloud link designed alongside the board rather than after it.
Input & Output Circuits
Sensor inputs, relay and load-switching outputs, and metering interfaces matched to the signals your equipment produces.
Microcontroller Selection
A processor matched to the interfaces, memory and power budget, and chosen for long-term availability.
Power Supply Design
Supply circuits for mains, battery or solar input, with protection specified for the installation site.
Communication Interfaces
RS-485, Modbus, Ethernet, Wi-Fi, BLE, LoRa or cellular links, selected on range, power and conditions at the site.
Controller Firmware
Control logic, schedules, fault handling and telemetry, developed alongside the board rather than handed off afterward.
Technologies & Delivery Models
Hardware Electronics
The tools we rely on for this layer of the system.
Why KoderTroop for Controller Board Development
Devices, cloud and applications delivered by one partner, with every decision documented and handed over.
Integrated Hardware and Software Design
Board, firmware and cloud platform share one architecture, so interface decisions are made once and honored at every layer.
Designed for the Field
Power, temperature, enclosure and connectivity at the installation site shape the design from the first schematic.
Prototype to Production-Ready Boards
We design, prototype and validate every board and deliver production-ready files, then support our manufacturing partners through fabrication, assembly and first builds.
You Own the Design Files
Schematics, layout, bill of materials and firmware source are documented and handed to your team at the end of the engagement.

Related Case Studies
Frequently Asked Questions
Your Controller Board Development Project
Tell us what you are building and the constraints around it. We will scope the work with you.
Requirements & Hardware Architecture
We agree functions, interfaces, power, enclosure and cost targets, then select the processor, radios and principal components.
Circuit Design
We design and review the schematic, with our firmware developers checking pin assignments, peripherals and power states before layout.
PCB Development
We lay out the board to your mechanical constraints and prepare the fabrication and assembly files.
Prototype & Bring-Up
A manufacturing partner fabricates and assembles the prototypes. We power them up, verify each circuit and log every issue.
Firmware Integration & Testing
Firmware runs on the real board and is tested for function, communication, power use and behavior when power or the network drops.
Production Handover & Deployment
We hand over the production package and support pilot builds, field installation and the first devices in service.