Skip to main content
IoT Gateways

IoT Gateway Development

Field devices only pay off once their data reaches the platform. We design IoT gateway hardware, build its Linux or microcontroller software and connect it to your cloud.

Sectors We Build For
  • Network & Connectivity
  • Security & Surveillance
  • Connected Healthcare
  • Smart Cities & Infrastructure
  • Fleet & Logistics
  • Energy & Smart Utilities
Where Field Protocols Meet the Cloud

Where Field Protocols Meet the Cloud

Field devices tend to speak Modbus, RS-485, BLE or LoRa, while the cloud expects MQTT and HTTPS. The gateway translates between the two. We design gateways with the ports and radios a site actually needs, and write the software that polls devices, buffers data through outages and forwards it securely. When a standard industrial computer or module is the better choice for the project, we recommend it and build on it.

Service Offerings

Hardware Capabilities

A requirement becomes a validated prototype, with the firmware and the cloud link designed alongside the board rather than after it.

01

Gateway Hardware Design

Custom gateway boards specified with the processor, field-bus ports, radios and backhaul your deployment calls for.

02

Protocol Translation

Modbus, RS-485, BLE and LoRa devices read locally and published upstream over MQTT or HTTPS.

03

Local Buffering

Readings held on the gateway during a network outage and delivered in sequence once the link is restored.

04

Edge Processing

Filtering, aggregation and local rules on the gateway, so the backhaul carries only data worth sending.

05

Remote Management

Configuration, software updates and health reporting for gateways spread across many sites.

Technology32 Technologies

Technologies & Delivery Models

Select Category5 Categories
Why KoderTroop

Why KoderTroop for IoT Gateway Development

Devices, cloud and applications delivered by one partner, with every decision documented and handed over.

Integrated Hardware and Software Design

Board, firmware and cloud platform share one architecture, so interface decisions are made once and honored at every layer.

Designed for the Field

Power, temperature, enclosure and connectivity at the installation site shape the design from the first schematic.

Prototype to Production-Ready Boards

We design, prototype and validate every board and deliver production-ready files, then support our manufacturing partners through fabrication, assembly and first builds.

You Own the Design Files

Schematics, layout, bill of materials and firmware source are documented and handed to your team at the end of the engagement.

Frequently Asked Questions

Next Step

Your IoT Gateway Development Project

Tell us what you are building and the constraints around it. We will scope the work with you.

How an Engagement Runs
01

Requirements & Hardware Architecture

We agree functions, interfaces, power, enclosure and cost targets, then select the processor, radios and principal components.

02

Circuit Design

We design and review the schematic, with our firmware developers checking pin assignments, peripherals and power states before layout.

03

PCB Development

We lay out the board to your mechanical constraints and prepare the fabrication and assembly files.

04

Prototype & Bring-Up

A manufacturing partner fabricates and assembles the prototypes. We power them up, verify each circuit and log every issue.

05

Firmware Integration & Testing

Firmware runs on the real board and is tested for function, communication, power use and behavior when power or the network drops.

06

Production Handover & Deployment

We hand over the production package and support pilot builds, field installation and the first devices in service.